Huawei OSN 9800 03021XJF TN11LOA 8 x ANY -rate MUX OTU2 Wavelength Conversion Board

LOA converts signals as follows:

• 8 x (125 Mbit/s to 1.25 Gbit/s signals) <-> 1 x OTU2
• 4 x (1.49 Gbit/s to 2.67 Gbit/s signals)<-> 1 x OTU2
• 4 x OTU1 <-> 1 x OTU2
• 2 x 3G-SDI/3G-SDIRBR/FC400/FICON4G/Infiniband 2.5G <-> 1 x OTU2
• 1 x FC800/FICON8G/Infiniband 5G <-> 1 x OTU2
• 1 x FC1200/FICON10G/10GE LAN<-> 1 x OTU2e

Supports hybrid transmission of signals at a rate of 4.25 Gibt/s or lower, but does not support hybrid transmission of FC800/FICON8G/Infiniband 5G signals. The total rate of signals received at the client side cannot exceed 10 Gbit/s.

FE: Ethernet service at a rate of 125 Mbit/s GE: Ethernet service at a rate of 1.25 Gbit/s. Supports GE optical signals and GE electrical signals. 10GE LAN: Ethernet service at a rate of 10.31 Gbit/s STM-1/OC-3: SDH/SONET service at a rate of 155.52 Mbit/s STM-4/OC-12: SDH/SONET service at a rate of 622.08 Mbit/s STM-16/OC-48: SDH/SONET service at a rate of 2488.32 Mbit/s FC100: SAN service at a rate of 1.06 Gbit/s FC200: SAN service at a rate of 2.12 Gbit/s FC400: SAN service at a rate of 4.25 Gbit/s FC800: SAN service at a rate of 8.5 Gbit/s FC1200: SAN service at a rate of 10.51 Gbit/s FICON4G: SAN service at a rate of 4.25 Gbit/s FICON8G: SAN service at a rate of 8.5 Gbit/s FICON10G: SAN service at a rate of 10.51 Gbit/s Infiniband 2.5G: SAN service at a rate of 2.5 Gbit/s Infiniband 5G: SAN service at a rate of 5 Gbit/s ESCON: SAN service at a rate of 200 Mbit/s FICON: SAN service at a rate of 1.06 Gbit/s FICON Express: SAN service at a rate of 2.12 Gbit/s FDDI: SAN service at a rate of 125 Mbit/s HD-SDI: Bit-serial digital interface for high-definition television systems at a rate of 1.49 Gbit/s HD-SDIRBR: Bit-serial digital interface for high-definition television systems at a rate of 1.49/1.001 Gbit/s OTU1: OTN service at a rate of 2.67 Gbit/s SDI: Serial digital interface at a rate of 270 Mbit/s DVB-ASI: Video service at a rate of 270 Mbit/s 3G-SDI: Video service at a rate of 2.97 Gbit/s 3G-SDIRBR: Video service at a rate of 2.97/1.001 Gbit/s ISC 1G: SAN service at a rate of 1.06 Gbit/s ISC 2G: SAN service at a rate of 2.12 Gbit/s

• Provides the OTU2/OTU2e interface on WDM-side.
• Supports the OTN frame format and overhead processing by referring to the ITU-T G.709.
• ODU0 layer: supports the PM function and PM non-intrusive monitoring.
• ODUk(k=1, 2) layer: supports the PM and TCM function, and PM and TCM non-intrusive monitoring.
• ODUflex layer: supports the PM function and PM non-intrusive monitoring functions.
• OTUk (k=1, 2) layer: supports the SM function.

Supports the PRBS function on the client and WDM sides.

• Supports forward error correction (FEC) on the client side that complies with ITU-T G.709, only when the client side service type is OTU1.
• Supports forward error correction (FEC) on the WDM side that complies with ITU-T G.709.
• Supports advanced forward error correction (AFEC-2) on the WDM side that complies with ITU-T G.975.1.

• Monitors BIP8 bytes (Bursty mode) to help locate line failures.
• Monitors B1 bytes to help locate faults.
• Monitors OTN alarms and performance events.
• Monitors parameters such as the bias current, temperature, and optical power of the laser.
• Supports the remote monitoring (RMON) of Ethernet services.

• Supports intra-board 1+1 protection (when working with the OLP/DCP/QCP board).
• Supports client 1+1 protection.
• Supports OWSP protection.

• FE: 100M Full-Duplex
• GE(TTT-GMP): 1000M Full-Duplex, Auto-Negotiation

• When the board receives GE services and the port mapping is TTT-GMP on its client side, the board can support synchronous Ethernet transparent transmission instead of synchronous Ethernet processing.
• When the board receives 10GE LAN services and the port mapping is Bit Transparent Mapping (11.1 G) on its client side, the board can support synchronous Ethernet transparent transmission instead of synchronous Ethernet processing.

Supported

Supported